Gigasept is a concentrated product for the disinfection and cleaning of medical instruments and endoscopes.
Gigasept is a concentrated product for the disinfection and cleaning of medical instruments and endoscopes.
Properties:
Instructions for use:
Immerse instruments to be reprocessed in Gigasept Forte solution immediately after use. Make sure all surfaces are thoroughly wet and allow them to soak into the solution. Submerge hollow-body instruments in such a way that air can fully escape from the tube. After use, rinse tools thoroughly with at least tap water or, even better, sterile distilled or deionized water to completely remove any residual working solution.
Do not exceed the indicated contact times and concentrations. Follow the processing recommendations provided by the tool manufacturers. National regulations may require that cleaning and disinfection take place in two separate process steps. The working solution can be used for 7 days when used only to disinfect previously cleaned tools. If the working solution is used for cleaning, national regulations may limit the time for which the solution can be used. It is not suitable for the final disinfection of semi-critical and critical medical devices!
Composition:
100 g of the active solution contain active ingredients:
10 g Dimethyldioctylammonium Chloride, 15 g Phenoxypropanol, 15.6 g Guanidine,
N,N-1,3-propanediylbis-,N-coco alkyl derivatives, diacetates, 9.5 g N-dodecylpropa-
n-1,3-diamine. Characterization according to Regulation (EC) no. 648/2004: 5 – 15 % non-ionic surfactants, perfumes.
Form:
Concentrated liquid
Packaging:
2lt
Description
Gigasept is a concentrated product for the disinfection and cleaning of medical instruments and endoscopes.
Properties:
Instructions for use:
Immerse instruments to be reprocessed in Gigasept Forte solution immediately after use. Make sure all surfaces are thoroughly wet and allow them to soak into the solution. Submerge hollow-body instruments in such a way that air can fully escape from the tube. After use, rinse tools thoroughly with at least tap water or, even better, sterile distilled or deionized water to completely remove any residual working solution.
Do not exceed the indicated contact times and concentrations. Follow the processing recommendations provided by the tool manufacturers. National regulations may require that cleaning and disinfection take place in two separate process steps. The working solution can be used for 7 days when used only to disinfect previously cleaned tools. If the working solution is used for cleaning, national regulations may limit the time for which the solution can be used. It is not suitable for the final disinfection of semi-critical and critical medical devices!
Composition:
100 g of the active solution contain active ingredients:
10 g Dimethyldioctylammonium Chloride, 15 g Phenoxypropanol, 15.6 g Guanidine,
N,N-1,3-propanediylbis-,N-coco alkyl derivatives, diacetates, 9.5 g N-dodecylpropa-
n-1,3-diamine. Characterization according to Regulation (EC) no. 648/2004: 5 – 15 % non-ionic surfactants, perfumes.
Form:
Concentrated liquid
Packaging:
2lt